6 3/4 x 11''' | Hand Wind | Swiss Lever | No Seconds | Remarks: According to Pritchard, Matter was a Swiss company from Grenchen that was involved in the founding of a group of companies in 1925, which became...
158 views
8 3/4 x 12''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Movement family: Mauthe 1001: setting lever with pin, small seconds Mauthe 1002: setting lever with pin, sweeping seconds Mauthe 1003: setting lever with screw, small...
164 views
10 1/2''' | Hand Wind | Swiss Lever | Sweeping Seconds | Remarks: Rocking bar winding Click on the dial side
166 views
9 1/4''' | Hammer Automatic | Swiss Lever | Sweeping Seconds | Remarks: Hammer automatic with bidirectional winding IncaStar regulator The smallest automatic movement with hammer winding ever built in series in terms of diameter Broken setting lever spring
188 views
11 1/2''' | Hand Wind | Swiss Lever | Indirect Sweeping Seconds | Remarks: Indirect sweeping seconds without hacking The movement is also available with 10 1/2''' Part of a movement family: Minerva 48: Small seconds Minerva 49: Sweeping seconds...
215 views
11 1/2''' | Automatic | Swiss Lever | Indirect Sweeping Seconds | Date | Remarks: Newer movements with hacking seconds, older without Date with quick-setting at middle crown position Automatic with uni-directional winding Movement family: Miyota 8200: date, day, two-piece...
59 views
11 1/2''' | Hand Wind | Swiss Lever | Indirect Sweeping Seconds | Remarks: SK = skeletonized Indirect sweeping seconds without hacking Lift angle 49° The movement is also available in a gold-colored version One of the few hand-wound movements...
213 views
11 1/2''' | Automatic | Swiss Lever | Direct Sweeping Seconds | Remarks: Automatic with unidirectional winding, manual winding possible Sweeping seconds with hacking Date with quick setting in the middle crown position Automatic not as a separate module, but...
208 views
11 1/2''' | Automatic | Swiss Lever | Direct Sweeping Seconds | Date | GMT | Remarks: Automatic with unidirectional winding, manual winding possible Center seconds with hacking Date at 3 h No date quick setting -> semi-fast via GMT...
205 views
13 1/2''' | Automatic | Swiss Lever | Sweeping Seconds | Date at 3H | 24h Indicator at 6H | Power Reserve at 12H | Remarks: Automatic with unidirectional winding, manual winding possible Sweeping seconds with hacking Date with quickset...
229 views
19''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Swan-neck fine regulator 4 screw-set jewels This movement is available under the same movement designation as Lépine (open face) and Savonnette (hunter) version Movement family: Moeris 19''' B...
201 views
19''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Savonnette = hunter movement Swan-neck regulator
107 views
17 3/4''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: The movement shown is missing the hour wheel Moeri without 's' is the name of the company owner, Moeris his trademark Movement marked with Swiss patent number...
212 views
16''' | Hand Wind | Swiss lever | Small Seconds | Remarks: The Molnija 3602 was built over many decades with several modifications, and by different factories There is also a variant with a height of 3.5 mm Same movement...
258 views
16''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Same movement without shock protection: Molnija 3602
254 views
16''' | Hand Wind | Swiss Lever | Small Seconds | Chronograph | Remarks: Column-wheel chronograph: central chronograph seconds, 30 min counter at 11 H Base movement: Molnija 3602
98 views
19 3/4''' | Hand Wind | Pin Lever | No Seconds | Remarks: 01 is not an official caliber designation, but an assignment from the book by Eduard C. Saluz: Stiftanker-Taschenuhren aus Deutschland (2019) (Pin lever pocket watches from Germany)...
198 views
19 3/4''' | Hand Wind | Pin Lever | No Seconds | Remarks: 02 is not an official caliber designation, but an assignment from the book by Eduard C. Saluz: Stiftanker-Taschenuhren aus Deutschland (2019) (Pin lever pocket watches from Germany)...
192 views
21''' | Hand Wind | Swiss Lever | No Seconds | Alarm | Remarks: Common barrel for wheel train and alarm Rocking bar winding
197 views
6 3/4 x 8 1/4''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Morioka Tokei Inc. is part of the Seiko Group Escapement wheel on bridge side with Diashock settings Click on dial side The Morioka Tokei...
196 views
6 3/4 x 8 1/4''' | Hand Wind | Swiss Lever | Indirect Sweeping Seconds | Remarks: Morioka Tokei Inc. is part of the Seiko Group Escapement wheel on bridge side with Diashock settings Click on dial side The Morioka...
223 views
13''' | Key Wind | Cylinder | No seconds | Remarks: Maltese cross stopwork on the mainspring barrel Lépine V-bridge shape
163 views
11 1/2''' | Automatic | Swiss Lever | Direct Sweeping Seconds | Remarks: Movement family: Movado 380: no date Movado 387: date Movado 388: date, difference to 387 not known Movado 389: date, difference to 387/388 not known
70 views
5 3/4''' | Hand Wind (Backwinder) | Swiss Lever | No Seconds | Remarks: Winding on the bridge side (backwinder) Movement family: Movado 4: 21,600, screwless balance, backwinder (winding on the bridge side) Movado 5: 18,000, screw balance Movado 6:...
171 views
4 1/2 x 6''' | Manual Wind | Swiss Lever | No Seconds | Remarks: Movement family: Movado 45: 18000 bph, screw balance, fixed hairspring stud-holder Movado 46: 21600 bph, screw balance, fixed hairspring stud-holder Movado 47: 21600 bph, screw...
168 views
12''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Not an in-house development by Movado, the base movement is the Tavannes 214 and the bridge side is Movado-specific
172 views
7 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Screwed-in settings (Chatons)
179 views
5 1/2 x 6 1/2''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Movement family: Movado 53: 21,600 bph, screw balance, fixed hairspring stud-holder, built 1966 - 1970, back winder, diameter diagonal 15.35 mm (6 3/4''') Movado...
169 views
5 1/2 x 6 1/2''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Movement family: Movado 53: 21,600 bph, screw balance, fixed hairspring stud-holder, built 1966 - 1970, back winder, diameter diagonal 15.35 mm (6 3/4''') Movado...
152 views
5 3/4''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Movement family: Movado 4: 21,600, screwless balance, backwinder (winding on the bridge side) Movado 5: 18,000, screw balance Movado 6: 21,600, screw balance Movado 7: 21,600, screwless...
176 views
9 1/2''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Screw-set jewels (Chatons)
177 views
6 3/4 x 7 1/2''' | Hand Wind | Swiss Lever | No Seconds | Remarks: MSR = Manufactures d'Horlogerie Suisse Réunies SA Association of the companies Revue-Thommen, Vulcain, Buser and Phénix under the management of Revue (1961) Like MSR...
193 views
6 3/4 x 7 1/2''' | Hand Wind | Swiss Lever | No Seconds | Remarks: MSR = Manufactures d'Horlogerie Suisse Réunies SA Association of the companies Revue-Thommen, Vulcain, Buser and Phénix under the management of Revue (1961) Like MSR...
180 views
8 3/4''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: The Revue Thommen GT12 is technically identical to the GT14, but has a small second hand and is not skeletonized
228 views
9 1/2''' | Hand Wind | Swiss Lever | Sweeping Seconds | Remarks: MSR = Manufactures d'Horlogerie Suisse Réunies SA Association of Revue-Thommen, Vulcain, Buser and Phénix under the management of Revue (1961) The movements shown are from watches made...
170 views
11 1/2''' | Hand Wind | Swiss Lever | Sweeping Seconds | Remarks: Wheel train and motion works are driven independently of each other by the mainspring barrel Dial side partially skeletonized Part of a movement family: GT44: Hand winding,...
234 views
11 1/2''' | Automatic | Swiss Lever | Sweeping Seconds | Remarks: Wheel train and motion works are driven independently of each other by the mainspring barrel Dial side partially skeletonized Part of a movement family: GT44: Hand winding, sweeping...
262 views
18''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: The movement shown is missing the winding pinion, the minute wheel and the hour wheel The MST 252 is a Savonnette (hunter) movement. The MST 238 is the...
182 views
8 3/4 x 12''' | Hand Wind | Cylinder | No Seconds | Remarks: Rocking bar winding Click on the dial side
220 views
8 3/4''' | Hand Wind | Cylinder | No Seconds | Remarks: Rocking bar winding Click on the dial side The movement is also available as MST 323 SCI with indirect sweeping seconds
162 views
16''' | Hand Wind | Pin Lever | Small Seconds | Remarks: Rocking bar winding Click on the dial side The MST 370 is the Savonnette (hunter) version of the Lépine (open face) caliber MST 369
235 views
6 3/4 x 8''' | Hand Wind | Pin Lever | No Seconds | Remarks: Rocking bar winding Click on the dial side
171 views
6 3/4 x 8''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Movement family: MST 340: straight edges on the left and right, fixed hairspring stud-holder MST 381: rounded edges on the left and right, fixed hairspring...
95 views
5 1/2 x 6 3/4''' | Hand Wind | Swiss Lever | No Seconds | Remarks: KIF Duofix settings for escapement wheel
96 views
11 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Movement family: MST 400: 10 1/2''' MST 401: 11 1/2'''
126 views
18''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Movement family: MST 407: Lépine (open face) movement MST 408: Savonnette (hunter) movement
83 views
8 3/4''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Movement family: MST 450: 18,000 bph, no date MST 451: 18,000 bph, date MST 475: 21600 bph, no date MST 476: 21600 bph, date
103 views
5 3/4 x 6 3/4''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Girocap settings for escapement wheels Movement family: MST 466: form movement MST 468: round movement 6 3/4'''
96 views
11 1/2''' | Automatic | Swiss Lever | Direct Sweeping Seconds | Date | Remarks: Direct sweeping seconds without hacking Date switching by alternating 20:30 - 24:00 h
175 views
6 3/4 x 8''' | Hand Wind | Swiss Lever | No Seconds | Remarks: Rocking bar winding Click on the dial side According to the original data sheet, the MST 944 was formerly known as the MST 444
177 views
8 3/4''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: As caliber MST 947 also with indirect sweep second hand Rocking bar winding Click on the dial side
189 views
11 1/2''' | Hand Wind | Swiss Lever | Direct Sweeping Seconds | Remarks: MST 962: no date MST 963: date
91 views
18 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Nanda = trademark of George Henry, Geneva Savonnette = hunter, Lépine = open face
178 views
0 size (approx. 13''') | Hand Wind | Swiss Lever | Small Seconds | Remarks: Negative Winding with rocking bar
190 views
12 size (approx. 17 3/4''') | Hand Wind | Swiss Lever | Small Seconds | Remarks: Negative winding with rocking bar
186 views
12 size (approx. 17 3/4''') | Hand Wind | Swiss Lever | Small Seconds | Remarks: Negative winding with rocking bar
33 views
16 size (approx. 19 1/4''') | Manual Wind | Swiss Lever | Small Seconds | Remarks: Open face (Lépine) movement Positive crown winding Swan-neck fine regulator (New York Standard Type 4) Pillar construction Cocks for escape wheel and fourth wheel...
199 views
12 size (17 3/4''') | Manual Wind | Swiss Lever | Small Seconds | Remarks: Open face (Lépine) movement Positive crown winding Swan-neck fine regulator (New York Standard Type 4) Pillar construction Cocks for escape wheel and fourth wheel form...
65 views
10 size (approx. 17''') | Hand Wind | Swiss Lever | Small Seconds
176 views
10 1/2''' | Hand Wind | Pin Lever | Small Seconds | Remarks: Click on the dial side This movement is also available with sweeping seconds
167 views
16 size = 19 1/4''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Balance and hairspring made of palladium alloys according to Paillard Swan-neck fine regulator Screw-set jewels (Chatons) Movement family: No. 71 Best Quality Nickel Movement;...
174 views
10 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Movement family: Nouvelle Tavannes / Eberle 38: small seconds Nouvelle Tavannes / Eberle 38-1: indirect sweeping seconds
147 views
10 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: The setting lever spring on the movement shown is broken
202 views
10 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: The movement shown has a defective setting lever spring
243 views
18''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Escapement wheel under a dedicated bridge Wheel train bridge marked with METODA, a trademark of Nouvelle Tavannes
174 views
11 1/2''' | Manual Wind | Swiss Lever | Indirect Sweeping Seconds | Remarks: The OM 115 is very similar to the OM 116, but has a different height (5.0 mm vs. 4.05 mm)
172 views
11 1/2''' | Manual Wind | Swiss Lever | Indirect Sweeping Seconds | Remarks: The OM 115 is very similar to the OM 116, but has a different height (5.0 mm vs. 4.05 mm)
227 views
10 1/2'''| Hand Wind | Swiss Lever | Small Seconds | Remarks: Largely identical to the OM 150, the movements differ in height (OM 125: 4.05 mm, OM 150: 3.10 mm)
249 views
10 1/2'''| Hand Wind | Swiss Lever | Small Seconds Remarks: Largely identical to the OM 125, the movements differ in height (OM 150: 3.10 mm, OM 125: 4.05 mm)
169 views
19 1/2''' | Hand Wind | Pin Lever | Small Seconds | Remarks: Lateral anchor Pillar construction Barrel extends slightly beyond the movement plate The intermediate wheel between the crown wheel and ratchet wheel allows the third wheel to be...
192 views
10 1/2''' | Hand Wind | Cylinder | Small Seconds | Remarks: OISA / O.I.S.A. = Orologeria Italiana Società Azionaria, founded in 1937 by Domenico Morezzi. Morezzi produced his own movements and complete watches. Rocking bar winding Click on the...
177 views
10 1/2''' | Hand Wind | Pin Lever | Small Seconds | Remarks: OISA / O.I.S.A. = Orologeria Italiana Società Azionaria, founded in 1937 by Domenico Morezzi. Morezzi produced his own movements and complete watches. Xaros was one of his...
231 views
10 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: OISA / O.I.S.A. = Orologeria Italiana Società Azionaria, founded in 1937 by Domenico Morezzi. Morezzi produced his own movements and complete watches. Hemeros was one of his...
234 views
6 3/4 x 8 1/4''' | Hand Wind | Cylinder | No Seconds | Remarks: OISA / O.I.S.A. = Orologeria Italiana Società Azionaria, founded in 1937 by Domenico Morezzi. Morezzi produced his own movements and complete watches. Rocking bar winding...
164 views
19 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Dial feet held by springs rather than screws Movement probably identical to the Omega 19 NN L 15p
107 views
17''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: In 1949 Omega renamed the movement to Omega 160 Movement family: Omega 38.5 L 15p: Lépine (open face), 15 jewels Omega 38.5 L 17p: Lépine (open face), 17...
53 views
17 1/2''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Also known internally by Omega as Cal. 68a S in the caliber designation stands for Savonnette (hunter movement) The movement is also available as a Lépine (hunter)...
211 views
18''' | Hand Wind | Swiss Lever | Small Seconds | Remarks: Rare Savonnette (hunter) version of the caliber 40.6. 959,400 of the caliber 40.6 were produced between 1923 and 1936, but only 54,600 of them in the Savonnette version...
275 views